Welcome to Hydacon!
- Hydacon Chemtech LLP, Tamilnadu, IN
Product Overview
HYDAWET WP 11 is a high-performance, single-component, liquid-applied waterproofing and anti-fracture membrane designed for use beneath thin-set tile, stone, and brick installations. It forms a seamless, self-curing, load-bearing membrane that protects against moisture and accommodates minor structural movement, while its rapid-drying, colour-changing formulation allows direct installation of finishes without fabric reinforcement in most areas. Complying with ANSI A118.10, ANSI A118.12, and EN 14891 standards, it delivers reliable waterproofing performance for demanding applications.
APPLICATION SUITABILITY
- Suitable for concrete, masonry, mortar beds, and cement-plastered surfaces.
- Compatible with cement backer boards and interior-grade plywood.
- Ideal for interior and exterior wet areas.
- Recommended for shower pans, tubs, bathrooms, and laundries.
- Suitable for balconies, terraces, spas, and steam rooms with vapor barriers.
- Applicable in industrial, institutional, and food processing zones.
PRODUCT HIGHLIGHTS
- RAPID CURING – Flood test ready in as little as 2–24 hours depending on conditions
- FABRIC-FREE – No reinforcement fabric needed for most applications
- THIN PROFILE – 0.5–0.8 mm cured film thickness
- HIGH ELONGATION – >400% elongation for crack-bridging performance
- DIRECT APPLICATION – Bonds to metal and PVC fixtures
- ANTI-FRACTURE – Protects up to 3 mm of shrinkage or non-structural cracks
- LOW VOC – Solvent-free, non-flammable, safe for indoor use
FAQs
What is REGULAR 501 used for?
REGULAR 501 is a polymer-based tile adhesive designed for installing small natural stones, ceramic tiles, precast terrazzo, and terracotta in dry indoor flooring applications.
Which surfaces or substrates are suitable for this adhesive?
It can be applied on brickwork, AAC blocks, concrete surfaces, cement-based screeds/beds, and cement-plastered substrates.
Where can REGULAR 501 be used?
It is ideal for dry internal flooring, terraces, balconies, podium decks, and residential applications.
What makes REGULAR 501 easy to use?
The adhesive requires only mixing with water on-site and has a self-curing formula that reduces labour and simplifies application.
Does REGULAR 501 have strong adhesion performance?
Yes. It exceeds IS 15477:2019 Type 1T, EN 12004 C1T, and ANSI A118.1 T standards, offering high shear and tensile strength.
What is the recommended mixing ratio?
For a 20 kg bag, use 5.5–6.5 litres of clean water and mix using a low-speed drill to achieve a smooth paste.
How long should I wait before grouting after tile installation?
Grouting must be done after 24 hours, ensuring proper curing and bonding.
What is the coverage of a 20 kg bag of REGULAR 501?
Approximately 5–6 m² at 3 mm thickness using a 6×6 mm notched trowel. Coverage varies based on surface and technique.
How should the product be stored?
Store the Bag in a cool, dry place (10°C–30°C), away from sunlight, moisture, and extreme temperatures. Keep it sealed until use. Shelf life is 12 months.
What safety precautions should be followed?
Wear gloves and eye protection. In case of skin contact, wash with water; for eye exposure, rinse for 15 minutes and seek medical attention. Keep away from children.
